Get Adobe Flash player

Back Dimple Microdermals

Have you ever seriously considered a skin surface piercing and are weary due to the fact of the extreme denial rate (across 70%), Now you can try a microdermal improvement also called as a surface anchor.

The rejection rate is estimated to be about 2% and The healing process of back dimple microdermals take normally about 1-3 months.

Back dimple microdermals come in many shapes and sizes.
Here you can see some of microdermals look like:

You need to look at the shape so you can understand how a surface anchor works.

The basic elements are the same in all the surface anchors. Thy have holes at the base and a shaft.

The holes at the base of the jewelery make available space for your skin to grow through the holes for better and permanent securing the surface anchor.

The shaft in all microdermals that stick up above the skin is for the bead or jewelry head to screwed on. The skin hailing process around this shaft usually takes as a normal piercing.

The insertion techniques of microdermals involve no particular tools, just a skin punch needle and a taper, and it’s much less complicated then an implant technique.

The skin is pinched and the dermal punch is inserted into the skin at an angle.

The punch is removed and the anchor base with the holes is inserted in to the skin hole.
Right after that with the help of some finesse the piercer will separate the skin as required with the jewelery anchor and pop the part of the anchor into place under the skin.

What this lead to a small piece clinging out of the skin surface in which a bead or some other elements can be screwed in.
This is really a fast and simple process performed by a skilled expert.